DL99 M4 - Terrazzo Decorative Flooring 20KG 1.5mm - 40mm 40MPa

Cemimax DL99 is a cement based leveling compound designed with terrazzo aggregate component. It has very high compressive strength up to C40, especially suitable for high traffic, heavy wear location. DL99 is especially design to be used as overlays for polished and available in different colors and aggregate. All in one pre-mixed in bag provide an easy and fast application for job site. 1.5mm - 40mm in one application with 40MPa rating.

 

PRODUCT PROPERTIES/BENEFITS
Plastic dry cement mortar with finely graded fillers. When
mixed with water, produces a hydraulic-setting smoothing
compound with good flow properties and high coverage.


COMPOSITION
Special cements, mineral fillers, polyvinyl-acetatecopolymers, flow agents and additives.
• Super smooth
• Extremely high strength of compressive and bending
• Rapid hardening – walkable from 2 hours
• Superior flow – fast application
• Flexible – hand mix or pump application
• Can be polished
• Different colors and aggregates available
• Suitable for radiant floor heating system


TECHNICAL DATA
Compressive Strength
After 1 day approx. 15MPa
After 7 days approx. 25MPa
After 28 days approx. 40MPa
Tensile Bending Strength
After 1 day approx. 5MPa
After 7 days approx. 7MPa
After 28 days approx. 10MPa
Pack-size: 20kg bag
Shelf-life: Min 12 months
Coverage: Approximately 1m2 @ 10mm thick
Dry time: 2hrs
Working time: 20-30mins


THICKNESS
DL99 can be applied from 1.5mm to 40mm thickness in
one application. DL99 is recommended to be applied from
10mm for polished use.


SUBFLOOR PREPARATION
• The substrate must be sound, free from cracks, dry, clean
and free from materials which would impair adhesion.
• Test the substrate according to applicable standards and
report any deficiencies.

• Brush, abrade, grind or shot-blast any weak surface sections
or areas which will not accept adhesion. Thoroughly vacuum
to remove loose material and dust.
• According to type and condition of the subfloor, use
suitable Cemimax primer.
• Allow primers to dry thoroughly

 

APPLICATION
1. Put 2.7 litres of cold clean water into a clean container.
Sprinkle in the sack contents (20kg) whilst stirring briskly
and mix to a thick-fluid. Lump-free consistency. Use a drill
or mixer fitted with a Mixing Paddle. Do not mix too thinly.
2. Pour the mixture on the area to be applied, spread the
material uniformly to required thickness using toothed rake.
It is the next step to remove entranced air by particular roller.
3. Drying time at 20°C is approx 24 hours for polish.

DL99 M4 - Terrazzo Decorative Flooring 20KG 1.5mm - 40mm 40MPa

SKU: DL99-M4
$88.00Price
GST Included
  • Call our team today for pricing

  • Call or email today for delviery freight costs

    Pick up also available by appointment only first!