Bostik Ultraset HP MS Polymer Timber Flooring Adhesive 16kg

Bostik Ultraset HP MS Polymer Timber Flooring Adhesive 16kg

AUSTRALIAN MADE GLUE - Supporting Local Manufacturers!!!


Bostik Ultraset® HP is a one part solvent and isocyanate free MS polymer based elastomeric adhesive formulated to adhere most types of timber flooring systems.

  • Meets requirements for EN 14293:2006 “Adhesives for bonding parquet to subfloor”

  • Non-hazardous, solvent and isocyanate free formulation

  • Very low VOC

  • Non flammable

  • No mixing; ready to use

  • Easy to spread while maintaining stable peaks

  • Will not re-emulsify when in contact with moisture

  • Tested to ASTM C794 for peel adhesion to various species of Australian hardwood

  • Remains flexible after full cure

  • Excellent initial grab and final bond strength

  • Excellent acoustic properties

  • Suitable over radiant heating

  • Australian made

Recommended Uses

Adhering parquet, solid strip softwood and hardwood flooring, engineered flooring and bamboo flooring to concrete subfloors.

Adhering recommended acoustic underlays as an intermediate layer between subfloor and flooring system.



Colour: Brown
Viscosity: Smooth paste; holds peaks
Composition: MS Polymer
Application temperature: 5 to 30°C
Pack Sizes:

  • 16kg Pail (10L)
  • 600mL Sausage

Specific Gravity: 1.6 Approx.
Cure Rate:  2.5mm / 24hrs
Cure System: Moisture Cure

Full Cure: (1mm film) Approx. 18-24hrs Depending on temperature and relative humidity. Curing time extended in low humidity
Elongation: 300%
Walk on time: 16hrs – light traffic
Tack Free time: Approx. 1.25hrs @ 23°C 50% RH
Shore A Hardness: Approx. 50
Tensile Strength in Shear (2mm) Timber to Timber – BS EN 14293 1.3N/mm


  • V3 Notch = 1.2-1.4m2 / per litre
  • V4 Notch = 1-1.2m2 / per litre

Bostik Ultraset HP MS Polymer Timber Flooring Adhesive 16kg

GST Included