WAKOL PU280 - Moisture Barrier - 1 Component Ready to use Full Membrane 
Porous & NON-Porous Surfaces​
​***LAY FLOORS WITHIN 1hr **** SAME DAY NO DELAYS on dry times!!!!!
 
Wakol PU 280 is a ready-to-use 1-component polyurethane primer for priming absorbent and non-absorbent subfloors, and to reinforce abraded resp. sanded concrete edges. Also for capillary ascending humidity and higher residual humidity up to 6 CM% / 98 corresponding RH % in cement screeds without floor heating, on heated cement screeds up to max. 3 CM% / 85 corresponding RH % as well as on concrete up to max. 7,5% by weight / 98 corresponding RH %; applicable as moisture barrier on unheated cement screeds and concretes without prior moisture measurement.
 
Application method: WAKOL Primer Roller, short haired velour or foam roller
Consumption: approx.100-150 g/m² as primer, approx. 250-350 g/m² as moisture barrier
Drying time: approx. 40-50 minutes
Storage: not below +5 °C, store in a cool place
Base: polyurethane resin
EMICODE: EC1 PLUS
ZERO VOC
​
Suitable Applications: Porous & Non-Porous Surfaces
Concrete
Screed
Timber
Plywood
Tiles
Most Surfaces
​
Coverage:
1 Coat @ 150μm wet film
11L Consumption = 100-110 m2